Specification:
Condition: Brand New
Name:Oil Filter Assembly
Colour:As Shown
Material:plastic+Metal
OE Part Number:
31726-1XE0A, 317261XE0A
Fitment:
For Nissan Altima 2007-2013
For Nissan Maxima 2007-2014
For Nissan Murano 2009-2014
For Nissan Quest 2011-2013
Package Content:
1 X Oil Filter Assembly
or
3 X Oil Filter Assembly
Note:
1、Only the above package content, other products are not included.
2、Please make sure the part number and OE number are the same as your old part.
3、Light shooting and different displays may cause the color of the item in the picture.











Product Overview:
This Auparhig premium CVT Transmission Oil Cooler Filter is a direct OEM replacement for Nissan vehicles equipped with Jatco JF010E (RE0F09A) continuously variable transmissions (2007-2017). This external filter is located in the transmission oil cooler return line and is designed to remove fine contaminants, metal shavings, and debris from the transmission fluid before it returns to the transmission, protecting sensitive internal components such as valves, solenoids, pulleys, and belts.
Key Features
OEM Exact Fit: Strictly manufactured to 31726-1XE0A specifications for perfect alignment with original mounting points and hose connections
High-Efficiency Filtration: 10-micron filtration media provides superior protection for CVT components
Durable Construction: Galvanized steel housing resists corrosion and withstands high transmission pressures
Leak-Proof Design: Precision-machined hose connections and rubber seals prevent fluid leaks
Plug-and-Play Installation: No modifications required, bolts directly onto the original mounting bracket
Cost-Effective Solution: Same reliability as genuine Nissan parts at a fraction of the dealer price
Compatibility
Fits all Nissan vehicles equipped with JF010E (RE0F09A) CVT transmissions and 3.5L V6 engines from 2007 to 2017:
Altima (L32) 2007-2013
Maxima (A35) 2007-2014
Murano (Z51) 2009-2014
Quest (E52) 2011-2017
Teana (J32) 2008-2013 (Asia Pacific)
Replaces Part Numbers:
31726-1XE0A, 317261XE0A, OC0000077980819,
31726-1XE00, 31726-1XE01, 31726-1XE02, 31726-1XE03, 31726-1XE04, 31726-1XE05
Common Symptoms This Part Fixes
Dirty or contaminated transmission fluid
Reduced transmission performance and shifting quality
Transmission slipping or shuddering during acceleration
Delayed engagement when shifting into drive or reverse
Transmission overheating
Premature wear of internal transmission components
Increased transmission noise
Reduced fuel efficiency
Installation Instructions
Safely raise and support the vehicle on jack stands
Place a drain pan under the transmission oil cooler filter to catch spilled fluid
Disconnect the three hydraulic hoses from the old filter
Remove the two mounting bolts securing the filter to the vehicle
Carefully remove the old filter assembly
Clean the mounting surface thoroughly to remove dirt and debris
Install the new Auparhig transmission oil cooler filter onto the mounting bracket
Tighten the mounting bolts to the specified torque (15 Nm)
Reconnect the three hydraulic hoses to the new filter
Refill the transmission with the correct type and amount of Nissan CVT NS-2 fluid
Start the engine and allow it to idle for 5-10 minutes
Check the transmission fluid level and adjust as needed
Inspect for any fluid leaks
Test drive the vehicle to verify proper transmission operation
Note: It is recommended to replace this external filter every 30,000 miles along with the internal transmission filter for optimal CVT performance and longevity.
Package Includes
1 × Auparhig JF010E CVT Transmission Oil Cooler Filter Assembly
2 × Mounting Bolts
3 × Hose Clamps
Detailed Installation Instructions
Important Notes
Please confirm your vehicle model, year, and engine type (3.5L V6 only) before purchasing
This filter is designed for JF010E CVT transmissions only, not compatible with other transmission models
Always use Nissan CVT NS-2 specification transmission fluid
Follow the manufacturer’s recommended maintenance schedule for fluid and filter changes
Follow all safety precautions when working on your vehicle’s transmission
Dispose of old transmission fluid and components properly according to local regulations
Specifications
| Specification | Value |
|---|---|
| Brand | Generic |
| Country of Manufacture | CN |
| OEM / Part Numbers | 31726-1XE0A, 317261XE0A |
| SKU | KR-100738 |
Frequently asked questions
Which vehicles does this part fit?
It fits Nissan Altima Maxima Murano Quest (2007-2014). Check the fitment table above, or enter your vehicle in the fitment search before ordering.
What OEM or part numbers does this replace?
This part cross-references 31726-1XE0A, 317261XE0A. Compare the number on your old part before ordering.
Is it in stock and when will it ship?
Yes, it is in stock. Orders placed before our daily cut-off are dispatched from our US warehouse within 1 business day, with tracking emailed as soon as the label is created.
What if it does not fit my car?
If the part does not fit, contact us within 7 days for a return or exchange. Keep the original packaging and the part number on the box, which speeds up the claim.













Reviews
There are no reviews yet.