Application:
Make&Model
Year
Note
For Nissan Cube
2009-2014
All Models
For Nissan Sentra
2007-2008
Base, S, SL
For Nissan Sentra
2009-2012
Base, S, SL, SR
For Nissan Versa
2007-2008
2008: Non-ABS
For Nissan Versa
2009-2012
1.8L Models
OE/Part number:
Front Brake Disc:31463,S31463,S-31463
Front Brake Pads:P-815A,P815A,D815A
Specification:
Condition: New
Placement on Vehicle: Front, Left, Right
Instruction Included:Yes
Produced under an IATF 16949 quality management system
✔ Tested in accordance with relevant performance and durability requirements
✔ Strict quality inspection for dimensional accuracy and material consistency
Product size:
– Brake Rotors
Installation position
Front Dirver & Passenger Side
Material
G3000 Iron Alloy
Solid Or Vented Type Rotor
Vented
Rust Resistant Coating
Anti-rust oil treatment
Directional or Non-Directional
Brake Surface
Directional
ABS Tone Ring Included
No
Bearings Included
No
Mounting Bolt Hole Quantity
4
Mounting Bolt Hole Circle Diameter(mm)
114.3
Outside Diameter(mm)
279.8
Overall Height(mm)
44
Nominal Thickness(mm)
24
– Brake Pads
Installation position
Front Dirver & Passenger Side
Fitment
Direct Replacement
Backing Material
Steel
Pad Material
Semi Metallic
Pad Shims Included
Yes
Mounting Hardware Included
Yes
Mounting bolt
No
Lubricant Included
Yes
Pad Wear Sensor Included
Yes
Pad Wear Sensor Type
Mechanical Sear Sensor
Inner Pad Width(mm)
137.2 (±0.3)
Inner Pad Height(mm)
54.2 (±0.3)
Inner Pad Thickness(mm)
16.3 (-0.5)
Outer Pad Width(mm)
137.2 (±0.3)
Outer Pad Height(mm)
54.2 (±0.3)
Outer Pad Thickness(mm)
16.3 (-0.5)
Note on Initial Brake Noise
– Common Causes:
① New pads and rotors not fully bedded, causing uneven contact.
② Before anti-rust coating on rotors wearing off, may cause slight hissing.
③ Thin surface rust forms on rotors overnight in humid conditions, resulting in a squeak during initial braking.
– Resolution:
Noise will naturally disappear after 200–500 miles of normal driving. Avoid hard braking during this period.
Package included:
2x Front Drilled and Slotted Brake Rotors
4x Front Brake Pads w/Hardware
Features:
● Heat dissipation cuts thermal fade for stable braking
● Lightweight build enhances handling & responsiveness
● Reduce noise for quiet & smooth braking
● Shorter stopping distance in emergencies
Notice:
● New installed, if noise, it takes hundreds of miles to run in.
● If shaking, usually not installed correctly, try to instal again
● Please confirm your vehicle condition and OE number before placing an order!
Make&Model
Year
Note
For Nissan Cube
2009-2014
All Models
For Nissan Sentra
2007-2008
Base, S, SL
For Nissan Sentra
2009-2012
Base, S, SL, SR
For Nissan Versa
2007-2008
2008: Non-ABS
For Nissan Versa
2009-2012
1.8L Models
OE/Part number:
Front Brake Disc:31463,S31463,S-31463
Front Brake Pads:P-815A,P815A,D815A
Specification:
Condition: New
Placement on Vehicle: Front, Left, Right
Instruction Included:Yes
Produced under an IATF 16949 quality management system
✔ Tested in accordance with relevant performance and durability requirements
✔ Strict quality inspection for dimensional accuracy and material consistency
Product size:
– Brake Rotors
Installation position
Front Dirver & Passenger Side
Material
G3000 Iron Alloy
Solid Or Vented Type Rotor
Vented
Rust Resistant Coating
Anti-rust oil treatment
Directional or Non-Directional
Brake Surface
Directional
ABS Tone Ring Included
No
Bearings Included
No
Mounting Bolt Hole Quantity
4
Mounting Bolt Hole Circle Diameter(mm)
114.3
Outside Diameter(mm)
279.8
Overall Height(mm)
44
Nominal Thickness(mm)
24
– Brake Pads
Installation position
Front Dirver & Passenger Side
Fitment
Direct Replacement
Backing Material
Steel
Pad Material
Semi Metallic
Pad Shims Included
Yes
Mounting Hardware Included
Yes
Mounting bolt
No
Lubricant Included
Yes
Pad Wear Sensor Included
Yes
Pad Wear Sensor Type
Mechanical Sear Sensor
Inner Pad Width(mm)
137.2 (±0.3)
Inner Pad Height(mm)
54.2 (±0.3)
Inner Pad Thickness(mm)
16.3 (-0.5)
Outer Pad Width(mm)
137.2 (±0.3)
Outer Pad Height(mm)
54.2 (±0.3)
Outer Pad Thickness(mm)
16.3 (-0.5)
Note on Initial Brake Noise
– Common Causes:
① New pads and rotors not fully bedded, causing uneven contact.
② Before anti-rust coating on rotors wearing off, may cause slight hissing.
③ Thin surface rust forms on rotors overnight in humid conditions, resulting in a squeak during initial braking.
– Resolution:
Noise will naturally disappear after 200–500 miles of normal driving. Avoid hard braking during this period.
Package included:
2x Front Drilled and Slotted Brake Rotors
4x Front Brake Pads w/Hardware
Features:
● Heat dissipation cuts thermal fade for stable braking
● Lightweight build enhances handling & responsiveness
● Reduce noise for quiet & smooth braking
● Shorter stopping distance in emergencies
Notice:
● New installed, if noise, it takes hundreds of miles to run in.
● If shaking, usually not installed correctly, try to instal again
● Please confirm your vehicle condition and OE number before placing an order!
● We suggest that you seek professional installation to avoid unnecessary trouble.
●.
Specifications
| Specification | Value |
|---|---|
| Brand | Generic |
| SKU | KR-111402 |
Frequently asked questions
Which vehicles does this part fit?
It fits Nissan Sentra Versa Cube (2007-2014). Check the fitment table above, or enter your vehicle in the fitment search before ordering.
Is it in stock and when will it ship?
Yes, it is in stock. Orders placed before our daily cut-off are dispatched from our US warehouse within 1 business day, with tracking emailed as soon as the label is created.
What if it does not fit my car?
If the part does not fit, contact us within 7 days for a return or exchange. Keep the original packaging and the part number on the box, which speeds up the claim.





















Reviews
There are no reviews yet.