|
YEJ63 motor supporting SDZ1-02 |
Outer diameter 86/center distance 72/shaft 12mm/2NM/25W/99vdc |
|
|
YEJ71 motor supporting SDZ1-04 |
Outer diameter 103/center distance 87/shaft 14.8mm/4NM/30W/99vdc |
|
|
YEJ80 motor supporting SDZ1-08 |
Outer diameter 119/center distance 105/shaft 19.8mm/7.5NM/40W/99vdc |
|
|
YEJ90 motor supporting SDZ1-15 |
Outer diameter 128.5/center distance 114/shaft 24.8mm/15NM/50W/99vdc |
|
|
YEJ100 motor supporting SDZ1-30 |
Outer diameter 148.5/center distance 133/shaft 29.5mm/30NM/65W/99vdc |
|
|
YEJ112 motor supporting SDZ1-40 |
Outer diameter 168.5/center distance 150/shaft 29.5mm/40NM/70W/170vdc |
|
|
YEJ132 motor supporting SDZ1-80 |
Outer diameter 188.5/center distance 170/shaft 39.5mm/80NM/95W/170vdc |
|
|
YEJ160 motor supporting SDZ1-150 |
Outer diameter 222mm/medium 202mm/shaft 44.5mm/150NM/110W/170vdc |
|
|
Accessories such as brake discs/bushings |
Friction plate conventional shaft diameter in stock, special shaft diameter |
|
|
Rectifier rectifier bridge |
RY/ZL/KZL series, voltage 99vdc/170vdc |




purpose
This series of electromagnetic power loss brakes is powered on electromagnetic suction, when the power is cut off, the spring is pressurized to achieve friction braking, mainly matched with Y series motors to form YEJ series electromagnetic braking three-phase asynchronous motors. It is suitable for metallurgy, construction, chemical industry, food, machine tools, packaging, stage, elevator, ship and other machinery to achieve fast parking, accurate positioning, safe braking and other purposes.
conditions of use
This series of brakes can work reliably under the following conditions
1. The altitude should not exceed 2000 meters, and the relative humidity of the air should not exceed 85%.
2. In the surrounding medium, there is no gas or dust sufficient to corrode metals and damage insulation.
3. The working environment temperature is -5~ + 40 ° C, and there should be no oil stains on the surface of the friction plate.
4. The insulation class is Class B, the protection class is IP23, and the voltage fluctuation range does not exceed + 5% and -15%.
5. The working air gap shall not exceed the maximum working air gap.
6. Installation method: axial horizontal installation, axial vertical installation;
7. Working mode: intermittent work, continuous work.
Product structure and working principle
This series of brakes is composed of a magnetic yoke, an excitation coil, a spring, a brake disc, an armature, a spline sleeve, a manual release device, etc. It is installed on the rear end cover of the motor (or on the flange of the equipment), and the installation screws are adjusted to make the air gap to a specified value. The spline sleeve is fixed on the shaft, and the brake disc can slide axially on the spline sleeve, generating braking torque when braking.
When the brake coil is energized, the coil generates a magnetic field, the armature is magnetically attracted to the yoke, the armature is disengaged from the brake disc, and the brake disc is rotated normally by the motor shaft; when the coil is powered off, the magnetic field disappears, and the armature is pushed towards the brake disc by the force of the spring, generating friction torque and braking.
Pulling the “manual release device” or tightening the “screw release device” can also release the armature to facilitate the installation and adjustment of the equipment.













Compatible with the following models:
TQEB1 Series (Tuoke) Motor Brake TQEB1-05 TQEB1-08 TQEB1-15 TQEB1-30 TQEB1-40 TQEB1-80 TQEB1-150 TQEB2-200 TQEB2-300 TQEB2-450 TQEB2-600 TQEB2-850 TQEB2-2000 TQEB2-3000 TQEB2-4000 TQEB2-6000
DHM 3 Series Electromagnetic Brake DHM3-04 DHM3-05 DHM3-08 DHM3-15 DHM3-30 DHM3-40 DHM3-80 DHM3-150 DHM3-200 DHM3-300 DHM3-450 DHM3-600 DHM3-850 DHM3-2000 DHM3-05C DHM3-08C DHM3-15C DHM3-30C DHM3-40C DHM3-80C DHM3-150C DHM3-200C DHM3-300C DHM3-450C DHM3-4S DHM3-5S DHM3-8S DHM3-15S DHM3-20S DHM3-30S DHM3-45S DHM3-60S DHM3-85S DHM3-200S DHM3-8N DHM3-15N DHM3-20N DHM3-30N DHM3-45N DHM3-60N DHM3-85N DHM3-200N
SDZ1 series power loss brake SDZ1-02 SDZ1-04 SDZ1-08 SDZ1-15 SDZ1-30 SDZ1-40 SDZ1-80 SDZ1-150 SDZ1-200 SDZ1-300 SDZ1-450 SDZ1-600 SDZ1-850 SDZ1-2000
DZS3 series motor brake DZS3-05 DZS3-08 DZS3-15 DZS3-30 DZS3-40 DZS-40A DZS3-80 DZS3-150 DZS3-200 DZS3-300 DZS3-450 DZS3-600 DZS3-850 DZS2-2000, DZS2-05 DZS2-08 DZS2-15 DZS2-30 DZS2-40 DZS2-80 DZS2-150 DZS2-200 DZS2-300 DZS2-450 DZS2-600 DZS2-850
HDZ1 series motor brake HDZ1-05 HDZ1-08 HDZ1-15 HDZ1-30 HDZ1-40 HDZ1-80 HDZ1-150 HDZ1-200 HDZ1-300 HDZ1-450 HDZ1-600 HDZ1-850
DZM series explosion-proof motor brake DZM-04 DZM-08 DZM-16 DZM-32 DZM-45 DZM-80 DZM-160 DZM-200 DZM-300 DZM-450 DZM-550 DZM-900
DLTZ1 series electromagnetic power loss brake DLTZ-04 DLTZ-05 DLTZ-08 DLTZ-15 DLTZ-30 DLTZ-40 DLTZ-80 DLTZ-150 DLTZ-200 DLTZ-300 DLTZ-450 DLTZ-600 DLTZ-850 DLTZ-2000 DLTZ2-04 DLTZ2-05 DLTZ2-08 DLTZ2-15 DLTZ2-30 DLTZ2-40 DLTZ2-80 DLTZ2-150 DLTZ2-200 DLTZ2-300 DLTZ2-450 DLTZ2-600 DLTZ2-850 DLTZ2-2000
LDZ series electromagnetic power loss brake LDZ1-05 LDZ1-08 LDZ1-15 LDZ1-30 LDZ1-40 LDZ1-80 LDZ1-150 LDZ1-200 LDZ1-300 LDZ1-450 LDZ1-600 LDZ1-850 LDZ1-2000 LDZ1-3000 LDZ1-4000 LDZ1-6000 LDZ3-05 LDZ3-08 LDZ3-15 LDZ3-30 LDZ3-40 LDZ3-80 LDZ3-150 LDZ3-200 LDZ3-300 LDZ3-450 LDZ4-15 LDZ4-30 LDZ4-40 LDZ4-80 LDZ4 -150 LDZ4-200 LDZ4-300 LDZ4-450 LDZ4-600 LDZ4-850 LDZ5-04 LDZ5-05 LDZ5-08 LDZ5-15 LDZ5-30 LDZ5-40 LDZ5-80 LDZ5-150
BSZ3 series motor brake BSZ1-05 BSZ1-08 BSZ1-15 BSZ1-30 BSZ1-40 BSZ1-80 BSZ1-150 BSZ1-200 BSZ1-300 BSZ1-450 BSZ1-600 BSZ1-850 BSZ1-2000 BSZ1-3000 BSZ1-4000 BSZ1-6000 BSZ3-05 BSZ3-08 BSZ3-15 BSZ3-30 BSZ3-40 BSZ3-80 BSZ3-150 BSZ3-200 BSZ3-300 BSZ3-450
Specifications
| Specification | Value |
|---|---|
| Material | Aluminium-copper Alloy |
| Brand | Generic |
| SKU | KR-54329 |
Frequently asked questions
Which vehicles does this part fit?
It fits YEJ63; YEJ71; YEJ80. Check the fitment table above, or enter your vehicle in the fitment search before ordering.
What are the specifications?
Material: Aluminium-copper Alloy.
Is it in stock and when will it ship?
Yes, it is in stock. Orders placed before our daily cut-off are dispatched from our US warehouse within 1 business day, with tracking emailed as soon as the label is created.
What if it does not fit my car?
If the part does not fit, contact us within 7 days for a return or exchange. Keep the original packaging and the part number on the box, which speeds up the claim.



















Reviews
There are no reviews yet.