
Specifications:
– Brand New Ignition Coil
– Built to strict quality control standards.
– Ready to use, Direct Replacement.
– 100% Compatible with OEM Parts, meets Original Equipment Manufacturer (OEM) Standards
– 100% pure copper windings in bobbins improve durability. Thermoplastic housing withstands heat stress for enhanced durability
– Silicone rubber boot withstands extreme heat to ensure superior insulation
– Spark Plugs adopt High-Performance Iridium metal, much better than Nickel and Platinum
It’s suggested that ignition coil and spark plug be replaced in a synchronized manner to lower the likelihood of common ignition system dysfunctions such as failure to start, engine vibration, misfiring, inadequate power, spark plug fouling and poor fuel economy.
OEM Part Number:
For Dodge Sprinter 3500 2007-2008
For Dodge Sprinter 2500 2007-2008
For Mercedes-Benz SLK350 2005-2011
For Mercedes-Benz ML350 2006-2011
For Mercedes-Benz CLK350 2006-2009
For Mercedes-Benz SLK280 2006-2008
For Mercedes-Benz R350 2006-2011
For Mercedes-Benz E350 2006-2011
For Mercedes-Benz C230 2006-2007
For Mercedes-Benz C300 2008-2012
For Mercedes-Benz SLK300 2009-2011
For Mercedes-Benz C350 2006-2011
For Mercedes-Benz GLK350 2010-2012
For Mercedes-Benz C280 2006-2007
How to Change Ignition Coils and Spark Plugs?
This product recommends professional installation.
1. Disconnect the old ignition coil and spark plugs
2. Disconnect your battery’s negative terminal
3. Locate the ignition coil and spark plugs to be replaced.
4. Release the clip on the plug running into the side of coil.
5. Use a wrench to unscrew the bolts holding the original coil in place
6. Extract original ignition coil and spark plugs from the engine bay
7. Swapping in the new ignition coil and spark plugs
8. Prior to installation, compare the new coil to the old one
9. Orient the new coil in the same direction
10. Insert the bolts to hold the coil in place
11. Activate the New ignition coil and spark plugs
12. Connect the plug into the side coil
13. Plug in ignition cables according to the order written on them.
14. Reconnect the battery
15. Start the vehicle to test the new ignition coil and spark plugs
Important Note:
1. In preparation for the replacement, the vehicle should be turned off and cooled for a certain period of time before starting the replacement.
2. Pay attention to the cleanliness of the entire operation, must wipe the ignition coil around the dust and oil, if into the combustion chamber, will have serious adverse effects, try to wear gloves to operate.
3. Installation Manual Is NOT Included. Professional Installation Is Highly Recommended.
4. Please check the part number on your old part housing before purchase. Please confirm the item if it matches your car before you purchase.
5. We only sell BRAND NEW parts, unless otherwise stated.


































Reviews
There are no reviews yet.